basic 3d drawing of a kitchen

Concluding week we looked at some simple 3D tools get y'all started in 3D. This week I'm talking you lot through some of the more advanced techniques you can use to model a kitchen. Follow forth to acquire BricsCAD and take your CAD drawing to the next level.

Commands covered this week

Yous will need the same settings and workspace equally the previous two weeks.

Making the cupboards

I created the cupboards using Extrude and Multislice. I so added closet doors using Extrude and Array. 3D CAD drawing is very much like 2d CAD drawing, so don't be nervous!

To make the cupboards:

1. Outset past extruding the basic shape from the original line drawing, much as we did with the walls in week 1.
2. And then utilize the Piece – Multislice tool to extract the edge of the cupboard and divided the counter into cupboards.
   You tin eyeball the altitude or enter an exact figure. Once the start slice is set, y'all have the selection to repeat all slices at the same distance or to enter new distances.
   For this instance I wanted all my cupboards to be the same width, so I chose the Repeat option and fix my distance to 660.

   

   Split a solid entity into multiple entities quickly using Multi-Slice.

To brand the door shape:

1. Apply the OFFSET control to excerpt the edge of the door.
2. Then use EXTRUDE – create .
3. Repeat until you lot are happy with the design.
4. Fillet the edges to cease (these commands were covered last week.)
5. Next, use Assortment – Rectangle to repeat the design.
   I set the Rows to ane and Columns to 8, with a Distance of 600 (the same every bit the cupboard width).
   
6. Draw a line between the ii rows of cupboards.
7. MIRROR the assortment. Employ the line created to find the midpoint.
   I choose the No – Keep entities option.
   
8. Finally, go to the Backdrop console. Here yous will find all the options for an array. No need to start over.
9. Alter the Columns box from 8 to 5. Simple!

The Countertop

The adjacent thing to address was the countertop. I accidentally deleted the outline when I extruded the cupboard earlier then I redrew the edges with polylines, then extruded.

To do this:

1. Use POLYLINE – airtight and trace the edges of the surface.
   Tip: During a cartoon command, hit Shift when hovering over the confront of an object. This volition fix the cartoon plane to that face for the duration of the command. The selected confront will be highlighted in blue. Information technology works on apartment and rounded faces. Read more than.

   

   Hit shift during a command to fix the drawing plane.

2. Select the polyline and apply EXTRUDE – create to build the work surface.

The Stovetop and Sink

At this point, I imported the .dwg files for the stovetop and the sink. And then I cut holes in the work surface. I didn't brand these parts in BricsCAD, as they are parts that are going to come direct from a supplier. (You could make parts yourself using the commands we have already covered.)

To do this:

1. Go to File – Import .
   Tip: If you download the Communicator for BricsCAD, you lot can import a broad number of file types, including .stp.
2. Extract the edges of the objects using Extract – Edges .
3. Then OFFSET the edge if the object
4. Finally, use EXTRUDE to place holes in the countertop.

Adding details

At this stage, I noticed that the stovetop closet needed drawers, not a door. I exploded the assortment, deleted 1 of the doors, used Multislice and created the drawer fronts using the same technique as the cupboard doors.

To do this:

1. EXPLODE the array.
2. Delete the surplus door.
   
3. Use Multi-Slice to dissever the cupboard upwardly into drawers.
   This time I split the solid unevenly.
4. Create the drawer fronts (see instructions for the cupboard doors).

   

   Use Multi-piece to carve up the closet into different drawer widths.

Shelving

For the last closet I wanted to create an open up shelving unit. I shelled the solid, so extracted the surface and extruded shelves from this surface.

To exercise this:

1. Begin with the control SOLIDEDIT – Solid Trounce .
2. Select the face up to be removed.
3. Fix the shell distance.
   
4. Extract the surface of the inside of the cupboard using XFACES.
   This works only like the Extract Edges command nosotros covered final week, but it extracts faces instead.
5. Drag the surface to the correct height and extrude.
6. Utilize Boolean Wedlock (UNION) to bring together the parts together.

I used a similar technique to create the wine rack on the other side. Still, this time I used ARRAY. You might not realize it, but Assortment also works vertically.

The settings were: ARRAY – Rectangular and Rows and Columns – 1, Levels – four.

Finishing up

Finally, I extended the countertop using EXTRUDE.

Tip: If your objects starts joining dorsum together be sure to bank check to meet which mode y'all are using when extracting.

The last detail was to create the cupboards above the countertop. Information technology was a elementary case of copying one of the cupboards already created, editing the width and moving information technology to the right position. I used ARRAY to repeat the cupboard along the wall.

I added a few details and the kitchen was consummate. I'thousand non sure about the color, merely don't worry, that's only the layer colour! We'll exist covering materials and rendering at a later date.

To reduce the file size I used BLOCKIFY to create cake references. Read more about Blockify here.

Next time

Bring together me side by side calendar week for more CAD drawing tips.

Don't accept BricsCAD however?

Easy to try, easy to purchase, easy to own. That's BricsCAD. Try all of our products, for complimentary for thirty days at www.bricsys.com. Freedom of option, plus perpetual (permanent) production licenses that piece of work with all languages, in all places. Yous'll love what we've built for you with BricsCAD.

Go along Reading

1. Moving from 2nd to 3D CAD
2. 3D Drawing from engineering plans
3. Drawing everything just the kitchen sink
4. More Advanced Modeling
5. The Shower
6. The Sink
7. The Toilet
8. Walls and Floors
9. The Roof
10. Windows and Doors
11. Create your own components
12. Rubber Duck
13. Laser-cut puzzle project

---

Note: This series is intended as a guide to demonstrate how to apply dissimilar aspects of 3D modeling tools. It may non e'er demonstrate the fastest style of getting the result. Keep coming back to see if we cover a faster technique at a later engagement.

melaradayinkic.blogspot.com

Source: https://blog.bricsys.com/2d-3d-bim-cad-drawing/